High Voltage 50 Ω Pulse Generator
Features
- Wafer and package level TLP/HMM testing
- Fast 50 Ω high voltage pulse output with typical 300 ps rise time
- Up to 180 kW peak output power into 50 Ω load
- Built-in HMM pulse up to ±32 kV with 50 Ω-configuration
- High pulse output current up to ±120 A (short circuit) with 6 dB reflection suppression
- High speed 50 Ω trigger output for oscilloscopes (synchronous to high voltage pulse output)
- 6 GPIB programmable pulse rise times: 300 ps to 50 ns
- 1 built-in pulse width: 100 ns
- Optional external pulse width extensions 5/10/50/100/200/500 ns using an external pulse width extender TLP-12012A5
- Fast measurement time, typically 0.2 s per pulse including one-point DC measurement between pulses
- Efficient software for system control and waveform data management
- The software can control automatic probers for fast measurements of complete wafers
- High performance and high quality components
Download: Product Datasheet TLP-12010A
Accessories suitcase included with TLP-12010A (typical set)
Item | Sub-Item | Qty. | Description | Model Number |
1 | 1.0 | 1 | TLP/VF-TLP/HMM base unit TLP-12010A | TLP-12010A |
1.1 | 1 | High current HMM waveform module HMM-12010A | HMM-12010A | |
1.2 | 1 | DUT switch S-3000C-LT | S-3000C | |
1.3 | 1 | DUT switch control cable 2 m | PCC-200A | |
1.4 | 1 | DUT switch control cable 1 m | PCC-100A | |
1.5 | 1 | Resistive termination network 500 Ω setup | HIT-526A | |
1.6 | 1 | 50 Ω SMA current sensor module 120 A, 3 GHz, 0.5 V/A | ||
1.7 | 1 | PCB adaptor | PBA-3002A | |
1.8 | 1 | TLP Calibration kit for PCB measurements | CAL-KIT-200-A1 | |
1.9 | 1 | TLP calibration kit for wafer level measurements | CAL-03A | |
1.10 | 1 | SMA wideband pickoff-tee | PT-45A | |
1.11 | 1 | 30 kHz – 6 GHz, 10 A DC high current bias tee for TLP/VF-TLP/HMM and charge recovery measurements | ||
1.12 | 4 | BNC(m) to SMA(fm) adaptor | BNC(m)/SMA(fm) | |
1.13 | 2 | SMA(m)/SMA(m) adaptor | SMA(m)/SMA(m) | |
1.14 | 2 | SMA(f)/SMA(f) adaptor | SMA(f)/SMA(f) | |
1.15 | 1 | 10 dB, 18 GHz SMA attenuator | 6810.19.A | |
1.16 | 1 | 20 dB, 18 GHz SMA attenuator | 6820.19.A | |
1.17 | 1 | 2 x 4 mm (m) to BNC(f) adaptor, (Keithley 2400 front-side adaptor) | 2x4mm (m)/BNC(f) | |
1.18 | 3 | Flexible RG188A/U SMA(m)/SMA(m) 50 Ohm cable, 2m, for current sensor and DUT leakage | 269-5105-2000-A-A | |
1.19 | 2 | 50 Ohm SMA cable 1 m, Sucoflex 104P, for PCB adaptor | SF104P−2x11SMA−1m | |
1.20 | 4 | 50 Ohm SMA cable 2m, Sucoflex 104P, for pulse sense/force and vf-TLP delay line | SF104P−2x11SMA−2m | |
1.21 | 1 | Transient voltage suppressor protection for scope input | TVS-70MF-10 | |
1.22 | 1 | Power line cable according supply voltage, 150 cm | PLC-150A | |
1.23 | 1 | SMA torque wrench | 74Z-0-0-21 | |
1.24 | 1 | TLP software (object code) | TLP-GUI-OC | |
1.25 | 1 | TLP software manual | TLP-SM | |
1.26 | 1 | Hardware manual TLP-8010A | TLP-HM | |
1.27 | 1 | National Instruments GPIB-Controller for Hi-Speed USB | NI GPIB-USB-HS |